[No decomposition] "Canon G1310" how to improve the abandoned ink error and enter service mode

The Canon G1310 is a business inkjet printer equipped with an oversized capacity ink tank.

The point is that the ink cartridge can be printed in large quantities without replacing the ink cartridge, but there is a problem that this printer cannot be printed with an abandoned ink error.However, unlike other printers, you may be able to remove errors without a Canon service tool Service Tool.

In that case, it is necessary to set the printer in service mode, but it is a relatively easy task because it can be performed only by the button operation of the printer without a personal computer.

Do not work without expertise because this work may break ink leakage or worst printer.We do not take responsibility if the printer breaks down.

If the printer cannot be used with an abandoned inkerer, ask the manufacturer to repair it.

The content of this article is the one that eliminates the abandoned ink error and does not improve the number of printed number of prints.

How to enter service mode

First, press the power button 5 times while pressing the power button before entering the service mode.

Since the printer moves once, after stopping, press the reset button and press the power button to execute.

After pressing about 7 or 8 times, when the movement of the printer fell, turned off the power with the power button and turned on the power again.

By the way, if the reset button pressing work before entering the service mode is less than 5 times, the printer will usually start up.

Summary: In the service mode, it can be eliminated to eliminate waste ink errors without disassembly

One year after resetting in service mode, in September 2021, it can be printed without any problems without causing an error.

If you have a maintenance cartridge, you don't have to worry about abandoned ink, and if it gets dirty, you can do something, but the G1310 is not a maintenance cartridge, so if it gets dirty, you have to disassemble it and wash the waste ink absorption pad.

Even if the abandoned ink absorption pad is not dirty, the G1310 may cause an abandoned ink error, so if you are in trouble with a printing error, we recommend that you reset it once in the service mode.